ENC I HT Wireless Handheld Microphone System, - NEW in box

Roll over to magnify and click to enlarge
  • Image 1
  • Image 2
  • Image 3

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

$87.99 $69.99
(You save $18.00)
Brand:
SKU:
ENC-I-HT-ANY
Weight:
5.00 LBS
Shipping:
Free Shipping

Product Description

ENC HT Wireless Handheld Microphone System 

  • Available on selected frequencies in the VHF high band (171-216 MHz) for interference-free, long-range performance
  • Proprietary companding circuitry for an industry-best 120dB Dynamic Range, and the clearest, most natural sound available
  • Operating Range: Up to 250 feet typical (depending on site conditions)—
  • up to 500+ feet line-of-sight
  • Noise-free transmitter ON-OFF operation

ENCORE I RECEIVER
  • Half-rack receiver design with retractable front panel antenna
  • RF and AF 5-LED displays for monitoring incoming signal strength
  • and audio level
  • Balanced XLR and unbalanced adjustable 1/4” jack outputs
  • Mute (squelch) adjust control
  • Externally powered by AC/DC power adapter
  • Unique snap-out panel locking tabs for single receiver or dual receiver (side-by-side) optional rack mounting

WHT HANDHELD MIC TRANSMITTER

  • Features the Nady DM-10D unidirectional neodymium dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise
  • OFF/STANDBY/ON switch allows convenient audio muting with the transmitter “ON”
  • Low battery LED indicator flashes once for unit “ON”; lights steady for low battery alert

 


Frequency Response 25-20,000 Hz, +/-3dB
Dynamic Range 120dB
Total Harmonic Distortion < 0.3%
RF Carrier Frequency Range 169-216 MHz
Frequency Stability +/- 0.005%, crystal controlled
Modulation FM (F3E), +/-20KHz max.
Operating Range Up to 250 ft. typical (depending on site conditions); up to 500+ feet optimum line-of-sight


ENCORE I RECEIVER
Controls Power ON/OFF, volume control, mute control
Connectors Balanced XLR and unbalanced adjustable 1/4” audio out jacks, 2.1 mm barrel-type DC input jack
LED Indicators Power ON, 5-LED RF & AF level displays ,
Dimensions (Max.) 1.75” x 7.5” x 8.1” (4.4 x 19 x 20.7 cm)
Weight 1.6 lbs (.73 kg)
Power Requirements 12V @ 400mA, nominal, AC/DC adapter supplied
Antenna 11.2” (28.5 cm), single telescopic

TRANSMITTERS
Audio Inputs
• WHT Nady DM-10D neodymium dynamic cartridge
• WLT/WGT 3.5mm

Controls
• WHT OFF/STANDBY/ON switch
• WLT/WGT OFF/STANDBY/ON switch, input level adjust
LED Indicator Unit “ON” (single flash), Low Battery Alert (steady)
RF Power Out 50mW (Max. allowed by FCC)
Harmonic & Spurious Emissions > –40dB
Battery 9V
Battery Life Up to 15 hours
Dimensions
• WHT 9.5” X 1.4” Diam. (24.1 X 3.5 cm)
• WLT/WGT 4.1” X 2.4”X 0.8” (10.4 X 6.1 X 2.0 cm)
Weight (w/o battery)
• WHT 6.9 oz (193 g)
• WLT/WGT 3.6 oz (101 g)